gpmoon.blogg.se - march 2022

Pop up driver for account track on mac konicaminolta

#Pop up driver for account track on mac konicaminolta how to#
#Pop up driver for account track on mac konicaminolta mac os#
#Pop up driver for account track on mac konicaminolta manual#
#Pop up driver for account track on mac konicaminolta software#

#Pop up driver for account track on mac konicaminolta mac os#

We currently have several of our printers and plotters available for printing from Mac OS X.

Best practice is to print to a DNS Hostname in case the printer moves, or the subnet changes.We currently have several of our printers and plotters available for printing from Mac OS X.

When installing the Universal print driver manually, the driver configures the port to print to the IP address of the printer.

When configuring scanning, the scanner picks up as the domain and attempts to authenticate the account using /utln.

#Pop up driver for account track on mac konicaminolta software#

Can be done via Konica PageScope Device Manager software.

Can monitoring of these devices be centrally logged?.

When and how are firmware updates done?.

Account should have complex password and set not to expire however password should be changed on all copiers in a cycle.

Only change access to folder it needs to scan to or list access to root directory if scanning to specific folder.

Account should have least administrative privileges needed perform job.

This prevents service account from being able to log into local computers or through Remote Desktop Connection. (Can be done through GPO in a separate OU).

Service account should be denied Interactive Logon.

Scanners should have their own AD service account so that theyĬan be audited and the account can be disabled if compromised.

What is the best practice for locking down a proc account? If you are scanning to a shared network drive, a proc account is required.How do we program the department code into the printer driver?.Can we use command-lines to deploy the driver silently?.This will allow changing the admin password back to the default setting ofġ2345678 or it can be changed to a unique password

Press stop, 0 then Clear to access the admin security mode. Enter Service mode by pressing the Utility key then the Details button followed by pressing stop 0, 0, stop 0, 1.Ģ. Untested Solution from Old Konica Minolta Copiers To reset the admin password:ġ.

Answer: According to Konica Security Operations Manual, "If the Administrator Password is forgotten, it must be set again by the Service Engineer.".

#Pop up driver for account track on mac konicaminolta how to#

How to reset the admin password if it's lost, without resetting entire system?.

Are there any documents stored locally during scan to usb, e-mail or network share?.

Can we bypass "Track Account" login to login as admin at the touch panel?.

Secure Printing on Konica Minolta Copiers.

Enable Scan to Home Directory (Requires authentication to copier using Active Directory).

How to Create a Group Policy Object (GPO) for Mass Deployment of Copiers using a Windows-based Print Server.

How to Enable Scan to SMB (Scaning to Network Shares/Q Drive).

How to Configure Email SMTP (Scanning to Email).

How to enable NTLMv2 (used for more secure authenication).

How to change default Administrator password.

Enable internal Hard Drive encryption or disable scanning to internal hard drive.

#Pop up driver for account track on mac konicaminolta manual#

Note: Configuring copiers with a Manual IP may causes issues in the future if the Tufts DNS or WINS servers change as they have in the past).Set Copier to DHCP and assign DHCP Reservation using Proteus (This will insure that the copier always pulls the correct DNS, WINS, and gateway from DHCP server.Enable IP Filtering to limit direct IP printing and only allow authorized clients to print.Use of Print Server for centralized administration.Require Departmental Code before allowing Printing/Scanning/Copying.Disable unused procotols such as AppleTalk/Bonjour/WebDAV/FTP/NetWare.This cannot be done from the remote Konica Web Connection Page Scope. Note: You must be physically at the machine to change the Administrator password.Change default password to prevent unauthorized access.Please note this is the default manufacturer's password and it should be changed immediately to something more secure.These new Konica-Minolta multi-function devices replaced many of the previous Toshiba E-Series multi-function copiers that were purchased under the Danka contract Basic Information Tufts University signed an agreement with Konica-Minolta in 2010.